ReduSol is a shading agent that reflects high levels of solar energy. It is wear-resistant and can be easily removed with ReduClean. For many years ReduSol is the obvious choice for protecting crops against excess heat and light.
- Best price-quality ratio on the market
- Up to 80% shading
- Wear and frost resistant
- Higher light transmission during rainfall
- Flexible in use, easily combined with other ReduSystems products
- Suitable for glass, acrylate, polycarbonate and plastic film
- Easy to remove with ReduClean
ReduSol is a versatile shading agent that can be used in many different situations. Depending on the climate, both light-preferring and shade-preferring crops can benefit from a coating of ReduSol.
How to apply
For the best results, ReduSol should be diluted with a certain amount of clean water (depending on the application method) and sprayed evenly on a dry and clean greenhouse roof. The table below shows the number of buckets required and the effect on the greenhouse climate.
|Buckets per ha / acre||Heat reflection||Grow-light reflection (PAR)||Wear resistance|
|36 / 14|
|21 / 8|
|15 / 6|
|9 / 4|
Dilution: recommended total spray liquid per hectare is 1.700 – 2.000 liter for manual application and 1.000 – 1.500 for machine application.
How to remove
ReduSol is easy to remove with ReduClean. Spray at least 250 litres of ReduClean per hectare, diluted with 5-7 parts of clean water, evenly on the desired roof area. (26 US gallon/acre) Only apply when the roof surface is dry but rainfall is expected in the next few days. The rain will wash of the ReduSol layer.